Browse Our Catalog

Wedge Anchors - Page 4 - On Sale Now! Save up to 6%


On Sale! Up to 6% off on Wedge Anchors at The Herald Network, Page 4. Top brands include Simpson Strong-Tie, CONFAST, Powers Fastening Innovations, The Hillman Group, Red Head, ITW Ramset Red Head, & Trubolt Wedge Anchors. Hurry! Limited time offers. Offers valid only while supplies last.



Simpson Strong Tie THD37300H4SS 304 Stainless Steel Titen HD Screw Anchor 3/8 by 3'' (Pack of 50)
Simpson Strong Tie THD37300H4SS 304 Stainless Steel Titen HD Screw Anchor 3/8 by 3" (Pack of 50)
By Simpson Strong-Tie
In Stock
$148.35

mpn: THD37300H4SS, ean: 0707392390787,

4.0 out of 5 stars with 7 reviews
This high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance. Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications, The Titen HD demonstrates industry-leading performance even in Seismic conditions.Thread design undercuts to efficiently transfer the load to the base material; qualified for static and seismic loading conditions.


CONFAST 3/8'' x 3-3/4'' 316 Stainless Steel Wedge Anchor (10 per Box)
CONFAST 3/8" x 3-3/4" 316 Stainless Steel Wedge Anchor (10 per Box)
By CONFAST
In Stock
$49.99

mpn: WAS-31638334-I10,

4.3 out of 5 stars with 44 reviews
ApplicationsThe anchor is made from 316 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Submerged/Chemicals environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


CONFAST 3/8'' x 3-3/4'' Stainless Steel Wedge Anchor (10 per Box)
CONFAST 3/8" x 3-3/4" Stainless Steel Wedge Anchor (10 per Box)
By CONFAST
In Stock
$35.99

mpn: WAS38334-I10,

4.6 out of 5 stars with 57 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 3/8''.Le


CONFAST 3/8'' x 2-1/4'' Stainless Steel Wedge Anchor (50 per Box)
CONFAST 3/8" x 2-1/4" Stainless Steel Wedge Anchor (50 per Box)
By CONFAST
In Stock
$52.99

mpn: WAS38214,

4.7 out of 5 stars with 41 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is


CONFAST 5/8'' x 7'' Wedge Anchor Zinc Plated (Box of 20)
CONFAST 5/8" x 7" Wedge Anchor Zinc Plated (Box of 20)
By CONFAST
In Stock
$37.99

mpn: WA587,

4.4 out of 5 stars with 16 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


Simpson Strong Tie THD50500HMG 1/2-Inch by 5-Inch Titen HD Mechanically Galvanized Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
Simpson Strong Tie THD50500HMG 1/2-Inch by 5-Inch Titen HD Mechanically Galvanized Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack
By Simpson Strong-Tie
In Stock
$78.00
$73.09
You Save: 6%

mpn: THD50500HMG, ean: 0707392163916,

4.3 out of 5 stars with 58 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. Mechanically Galvanized meets ASTM B695, Class 65, Type 1. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoo


CONFAST 1/2'' x 3-3/4'' Wedge Anchor Zinc Plated (Box of 25)
CONFAST 1/2" x 3-3/4" Wedge Anchor Zinc Plated (Box of 25)
By CONFAST
In Stock
$22.99

mpn: WA12334,

4.9 out of 5 stars with 43 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho


Powers Fastening Innovations 07602 Power-Stud - 1/4-Inch by 2-1/4-Inch Type 316 Stainless Steel Wedge Expansion Anchor, 100 Per Box
Powers Fastening Innovations 07602 Power-Stud - 1/4-Inch by 2-1/4-Inch Type 316 Stainless Steel Wedge Expansion Anchor, 100 Per Box
By Powers Fastening Innovations
In Stock
$64.34
$63.37
You Save: 2%

mpn: 07602, ean: 0075352076027,

4.7 out of 5 stars with 14 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Fully threaded, wedge style anchor. Available in carbon steel and stainless steel. 100 per box.


CONFAST American Made 3/4'' x 12'' Hot-Dipped Galvanized Wedge Anchor (10 per Box)
CONFAST American Made 3/4" x 12" Hot-Dipped Galvanized Wedge Anchor (10 per Box)
By CONFAST
In Stock
$164.44

mpn: TSG3412,

4.8 out of 5 stars with 8 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized and meets the Buy America Act (BAA). This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer dri


Strong Bolt STB2-37700 Wedge Anchor 3/8-Inch by 7-Inch, 50-Piece
Strong Bolt STB2-37700 Wedge Anchor 3/8-Inch by 7-Inch, 50-Piece
By Simpson Strong-Tie
In Stock
$60.67
$60.09

mpn: STB2-37700, ean: 0707392843023,

4.5 out of 5 stars with 23 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


The Hillman Group 372160 Wedge-Bolt+ Anchor, 3/8 X 2-1/2-Inch, 50-Pack
The Hillman Group 372160 Wedge-Bolt+ Anchor, 3/8 X 2-1/2-Inch, 50-Pack
By The Hillman Group
In Stock
$68.54

mpn: 372160, ean: 0008236726312,

4.7 out of 5 stars with 15 reviews
Wedge bolt anchors are versatile and can be used in a variety of base materials, including brick, Block, concrete, and hollow block. Wedge-bolt anchors have specially designed dual threads that engage the base material immediately upon tightening. Unlike traditional wedge or sleeve type anchors, they will not spin in the hole when attempting to tighten. Wedge-bolt anchors are removable and reusable, unlike traditional anchors, and are manufactured from heat-treated, high strength carbon steel th


Red Head 11277 Redhead Wedge Anchor, 1/4 In X 2-1/4 In, 1-1/8 X 1-15/16 In Min Embed, Steel
Red Head 11277 Redhead Wedge Anchor, 1/4 In X 2-1/4 In, 1-1/8 X 1-15/16 In Min Embed, Steel
By Red Head
In Stock
$24.09
$24.04

mpn: 11277, ean: 0092097112773,

4.2 out of 5 stars with 8 reviews
Red Head wedge anchor, series: true bolt, 1/4 in anchor diameter, 2-1/4 in anchor length, 1-1/8 x 1-15/16 in minimum embedment depth, steel, 2 x 4 ft, sill plates, for tilt-up construction, highway rails and posts, HVAC and Plumbing systems, metal doors and window frames. Designed for fastening applications in solid concrete. Corrosion resistant. Anchors are building code approved.Ideal for attaching sill plates, electrical equipment and structural supports. Fastens into solid concrete. Corrosio


Red Head WS-3850 Trubolt Carbon Steel Wedge 3/8-Inch by 5-Inch Anchor (50 per Box)
Red Head WS-3850 Trubolt Carbon Steel Wedge 3/8-Inch by 5-Inch Anchor (50 per Box)
By ITW Ramset Red Head
In Stock
$39.89

mpn: IRHWS3850, ean: 0662520020243,

4.7 out of 5 stars with 52 reviews
ITW Red Head Wedge Anchor, Type: Wedge Anchor, Style: Carbon, Size: 3/8'' x 5'', Package Quantity: 50 per boxSize: 3/8-inch, length: 5-inch, quantity: 50. Durable. Easy to set. Use to connect wood frame to concrete.


CONFAST 1'' x 6'' Wedge Anchor Zinc Plated (Box of 5)
CONFAST 1" x 6" Wedge Anchor Zinc Plated (Box of 5)
By CONFAST
In Stock
$27.99

mpn: WA16,

4.0 out of 5 stars with 30 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor


The Hillman Group 371948 Wedge Anchor, 5/8 X 5-Inch, 10-Pack
The Hillman Group 371948 Wedge Anchor, 5/8 X 5-Inch, 10-Pack
By The Hillman Group
In Stock
$25.78
$24.57
You Save: 5%

mpn: 371948, ean: 0008236680836,

4.4 out of 5 stars with 44 reviews
Power fasteners power stud anchor. Steel/zinc-plated. For use in concrete, stone, brick, and Block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required.Power fasteners power stud anchor. Steel/zinc-plated. For use in concrete, stone, brick, and block.


ITW Red Head WS-5870 5/8'' x 7'' Trubolt Carbon Wedge Anchor 10 Per Box
ITW Red Head WS-5870 5/8" x 7" Trubolt Carbon Wedge Anchor 10 Per Box
By Trubolt Wedge Anchors
In Stock
$37.59

mpn: IRHWS5870, ean: 0662520020441,

4.7 out of 5 stars with 25 reviews
ITW Red Head Wedge Anchor, Type: Wedge Anchor, Style: Carbon, Size: 5/8'' x 7'', Package Quantity: 10 per boxPlease See Title or Description for Package Qty..


CONFAST American Made 1/4'' x 2-1/4'' Zinc Plated Wedge Anchor (100 per box)
CONFAST American Made 1/4" x 2-1/4" Zinc Plated Wedge Anchor (100 per box)
By CONFAST
In Stock
$56.04

mpn: TS14214,

4.1 out of 5 stars with 18 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated and meets the Buy America Act (BAA). This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter


CONFAST 1/2'' x 10'' Stainless Steel Wedge Anchor (10 per Box)
CONFAST 1/2" x 10" Stainless Steel Wedge Anchor (10 per Box)
By CONFAST
In Stock
$85.99

mpn: WAS1210-I10,

4.3 out of 5 stars with 32 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2''.Le


Strong Bolt STB2-62412 Wedge Anchor 5/8-Inch by 4-1/2-Inch, 20-Piece
Strong Bolt STB2-62412 Wedge Anchor 5/8-Inch by 4-1/2-Inch, 20-Piece
By Simpson Strong-Tie
In Stock
$42.89
$40.52
You Save: 6%

mpn: STB2-62412, ean: 0785577164736,

4.3 out of 5 stars with 46 reviews
The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.Tri-segmented clip. Dual embossments


CONFAST 3/4'' x 8-1/2'' Galvanized Wedge Anchor (Box of 10)
CONFAST 3/4" x 8-1/2" Galvanized Wedge Anchor (Box of 10)
By CONFAST
In Stock
$61.99

mpn: WAG34812,

4.8 out of 5 stars with 17 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the ancho



Viewing Page 4 of 5

View more products in Anchors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - theheraldnetwork.com. All Rights Reserved.