Browse Our Catalog

Wedge Anchors - Page 2 - Mega Sale! Save up to 29%


Mega Sale! Up to 29% off on Wedge Anchors at The Herald Network, Page 2. Top brands include CONFAST, Simpson Strong-Tie, RAW PRODUCTS CORP, N. Fasteners, Red Head, FABORY, & MKT FASTENING. Hurry! Limited time offers. Offers valid only while supplies last.



CONFAST 1/4" x 3-1/4" 316 Stainless Steel Wedge Anchor (100 per Box)
By CONFAST
In Stock
$148.99

mpn: WAS-31614314,

4.2 out of 5 stars with 19 reviews
ApplicationsThe anchor is made from 316 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Submerged/Chemicals environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


Simpson Strong Tie THD37600H 3/8-Inch by 6-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
By Simpson Strong-Tie
In Stock
$94.64

mpn: THD37600H, ean: 0707392402718,

4.4 out of 5 stars with 49 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.Easy post-installation inspection head


Wedge Anchor 316 Stainless Steel - 5/8"-11 x 6" Qty-10
By RAW PRODUCTS CORP
In Stock
$160.71

mpn: 618930262377, ean: 0618930262377,

4.9 out of 5 stars with 33 reviews
Wedge Anchor 316 Stainless Steel - 5/8''-11 x 6'' Qty-10Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.. Wedge anchors can be used to fasten objects to concrete.. These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.. Wedge anchors cannot be used on brick or block.. Non-corrosive in fresh or rain water applications.


Simpson Strong Tie THD50934RC 1/2-Inch by 9-3/4-Inch Titen HD Rod Coupler for Concrete/Masonry, 20 per Pack
By Simpson Strong-Tie
In Stock
$110.00
$77.99
You Save: 29%

mpn: THD50934RC, ean: 0707392260820,

4.0 out of 5 stars with 52 reviews
The Titen HD Rod Coupler is designed to be used in conjunction with a single or multi-story tie-down system. This anchor provides a fast and simple solution for attaching threaded rod to a concrete stem wall or slab footing. Unlike adhesive anchors, the installation requires no special tool, cure time or secondary process; just drill a hole and drive the anchorThe serrated cutting teeth and patented thread design enable the Titen HD Rod Coupler to be installed quickly and easy. Specialized head


Wedge Anchor 304 Stainless Steel - 1/2"-13 x 10" Qty-10
By RAW PRODUCTS CORP
In Stock
$140.91

mpn: 618930261998, ean: 0618930261998,

4.5 out of 5 stars with 39 reviews
Wedge Anchor 304 Stainless Steel - 1/2''-13 x 10'' Qty-10Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.. Wedge anchors can be used to fasten objects to concrete.. These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.. Wedge anchors cannot be used on brick or block.. Non-corrosive in fresh or rain water applications.


5/16"-18 X 5" Zinc Plated Wedge Anchors (Box of 100)
By N. Fasteners
In Stock
$100.30

mpn: 5165WANBX, ean: 0749273245755,

4.6 out of 5 stars with 41 reviews
5/16''-18 X 5'' Zinc Plated Wedge Anchors (Box of 100)5/16''-18 X 5'' Zinc Plated Wedge Anchors (Box of 100).


CONFAST 5/8 x 4-1/2 316 Stainless Steel Wedge Anchor (25 per box)
By CONFAST
In Stock
$211.99

mpn: WAS-31658412,

4.9 out of 5 stars with 12 reviews
ApplicationsThe anchor is made from 316 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Submerged/Chemicals environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the


Concrete Wedge Anchors Zinc Alloy - 3/4-10 X 4-3/4 - Qty 100
By RAW PRODUCTS CORP
In Stock
$258.50

mpn: 046737823703, ean: 0046737823703,

4.4 out of 5 stars with 48 reviews
Concrete Wedge Anchors Zinc Alloy - 3/4-10 X 4-3/4 - Qty 100Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.. Wedge anchors can be used to fasten objects to concrete.. These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.. Wedge anchors cannot be used on brick or block.. The non-threaded end is embedded into the hole and then struck to


CONFAST 5/8" x 5" Stainless Steel Wedge Anchor (20 per Box)
By CONFAST
In Stock
$135.99

mpn: WAS585,

4.7 out of 5 stars with 25 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is


Simpson Strong-Tie Wedge Tie 18 Ga
By Simpson Strong-Tie
In Stock
$131.45
$110.73
You Save: 16%

mpn: WT8, ean: 0044315925405,

4.2 out of 5 stars with 42 reviews
Simpson Strong-Tie Galvanized Steel Wedge Form Tie - Designed for low foundation wall applications. 5/8'' wide formed V design for rigidity allows accurate form spacing and support. Use (2) 3-1/2'' long wedges for each tie. Used with 2x solid sawn lumber. Not recommended for wall pours greater than 4' high. 18-gauge galvanized steel. - Material: Galvanized, Gauge: 18 ga., Pkg Qty: 1United States.


Simpson Strong Tie Wa62120 5/8-Inch by 12-Inch with 6-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 10-Piece
By Simpson Strong-Tie
In Stock
$46.00
$44.99
You Save: 2%

mpn: WA62120, ean: 0044315237027,

4.1 out of 5 stars with 43 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


CONFAST 5/8" x 12" Hot-Dipped Galvanized Wedge Anchor (Box of 10)
By CONFAST
In Stock
$79.29

mpn: WAG5812,

4.7 out of 5 stars with 22 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter


CONFAST 1/4" x 3-1/4" Stainless Steel Wedge Anchor (100 per Box)
By CONFAST
In Stock
$85.99

mpn: WAS14314,

4.0 out of 5 stars with 21 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/4''.Le


CONFAST 3/4 x 4-1/4 Hot-Dipped Galvanized Wedge Anchor (Box of 20)
By CONFAST
In Stock
$77.99

mpn: WAG34414,

4.8 out of 5 stars with 58 reviews
ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 3/4'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter


CONFAST 5/8" x 4-1/2" Stainless Steel Wedge Anchor (25 per Box)
By CONFAST
In Stock
$99.99

mpn: WAS58412,

4.3 out of 5 stars with 27 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 5/8''.Le


Simpson Strong Tie THD37500HMG 3/8-Inch by 5-Inch Titen HD Mechanically Galvanized Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
By Simpson Strong-Tie
In Stock
$183.01

mpn: THD37500HMG, ean: 0707392542414,

4.7 out of 5 stars with 10 reviews
The Titen HD anchor is a patented, high strength screw for concrete and masonry. Mechanically Galvanized meets ASTM B695, Class 65, Type 1. It is design for cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The self-cutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary


Red Head GWS-3850 Wedge Anchor GWS3850 (Pack of 46)
By Red Head
In Stock
$92.33

mpn: GWS-3850,

4.2 out of 5 stars with 34 reviews
PN: GWS-3850 GWS3850 GWS-3850GWS38503/8'' X 5''UPC:662520062441


Wedge Anchor, 5/8", 5", 303/304, PK2- Pack of 5
By FABORY
In Stock
$126.54
4.5 out of 5 stars with 40 reviews
Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 5/8 In., Anchor Length 5 In., Max. Work Thickness 1-1/8 In., Thread Length 3-13/16 In., Thread Size 5/8 In.-11, Min. Embedment 2-3/4 In., Embedment In Concrete 2-3/4 In., Package Quantity 2Ultimate Tension in 4000 PSI Concrete (Lb.): 7480. Min. Embedment: 2-3/4quot;. Material: 303/304 Stainless Steel. Item: Wedge Anchor. Embedment In Concrete: 2-3/4quot;.


Wedge Anchor, Gr 5, 3/4 x 7 In, PK15
By MKT FASTENING
In Stock
$271.68
4.6 out of 5 stars with 59 reviews
Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 5, Fastener Finish Zinc Plated, Anchor Dia. 3/4 In., Anchor Length 7 In., Max. Work Thickness 2-7/8 In., Thread Length 2 In., Thread Size 3/4 In.-10, Min. Embedment 3-3/8 In., Embedment In Concrete 3-3/8 In., Ultimate Pullout (Lb.) 11,975, Ultimate Shear (Lb.) 15,126, Ultimate Shear in 3000 PSI Concrete (Lb.) -, Ultimate Shear in 4000 PSI Concrete (Lb.) 15,126, Ultimate Tension (Lbs.) 11,975Thread Size: 3/4quot;-10. Ultimate Shear


Wedge Anchor, Steel, Not Graded, ZP, PK100
By FABORY
In Stock
$163.38
4.2 out of 5 stars with 38 reviews
Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 In., Anchor Length 3-3/4 In., Max. Work Thickness 11/16 In., Thread Length 2 In., Thread Size 1/2 In.-13, Min. Embedment 2-1/4 In., Embedment In Concrete 2-1/4 In., Package Quantity 100Country of Origin (subject to change): Multiple.



Viewing Page 2 of 5

View more products in Anchors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - theheraldnetwork.com. All Rights Reserved.