Browse Our Catalog

Flat Washers - Page 4


Save on Flat Washers at The Herald Network, Page 4. Top brands include CRS, Newport Fasteners, ASPEN FASTENERS, PRIME-LINE, Jet Fitting & Supply Corp, RAW PRODUCTS CORP, RAW Products Corp, Lexar Industrial, Fastenere, ASMC Industrial, Ocal, Off The Shelf Hardware, Titan Fasteners, Kanebridge, & Unknown. Hurry! Limited time offers. Offers valid only while supplies last.



30 Degree Angled Washers, 1/4'' Bore for 1/8'' and 3/16'' End Fittings, Type 316 Marine Grade Stainless Steel, 10 to 100 pcs (50)
30 Degree Angled Washers, 1/4" Bore for 1/8" and 3/16" End Fittings, Type 316 Marine Grade Stainless Steel, 10 to 100 pcs (50)
By CRS
In Stock
$69.50
4.6 out of 5 stars with 22 reviews
Bore 1/4 inch Outside diameter 5/8 inchT316 Marine Grade Stainless Steel...


18-8 Stainless Bundle - Socket Cap Screw M6-1.0 x 12, M6-1.0 x 16, M8-1.25 x 16 / M6 Lock Washer / M8 Fender Washers - 18-8 Stainless Steel (100 pcs Each Item)
18-8 Stainless Bundle - Socket Cap Screw M6-1.0 x 12, M6-1.0 x 16, M8-1.25 x 16 / M6 Lock Washer / M8 Fender Washers - 18-8 Stainless Steel (100 pcs Each Item)
By Newport Fasteners
In Stock
$68.99

ean: 9145253345933,

4.0 out of 5 stars with 46 reviews
Bundle 18-8 Stainless Bundle - Socket Cap Screw M6-1.0 x 12, M6-1.0 x 16, M8-1.25 x 16 / M6 Lock Washer / M8 Fender Washers - 18-8 Stainless Steel (100 pcs Each Item).


(1500 pcs) M6, DIN 7349, Metric, Thick Flat Washers, A2 Stainless Steel
(1500 pcs) M6, DIN 7349, Metric, Thick Flat Washers, A2 Stainless Steel
By ASPEN FASTENERS
In Stock
$199.40

mpn: ME373-6X64X17X3-001500,

4.3 out of 5 stars with 49 reviews
Diameter (Nominal): M6Diameter (Dimension): 6mmInside Diameter (Nominal): 6.4mmOutside Diameter (Nominal): 17mmThickness (Nominal): 3mmProduct Class: WashersOrder: Flat WashersCategory: Thick Flat WashersSystem of Measurement: MetricBrand: Aspen Fasteners®Material: Stainless SteelMaterial Grade: A2 Stainless SteelCoating: UncoatedStandards and Specifications: DIN 7349These washers are thicker and have a larger outer diameter than the more common DIN 125 flat washer.. Use where a larger load


(75 pcs) M31, DIN 1441, Metric, Flat Washers for Clevis Pins, Coarse Finish, A2 Stainless Steel
(75 pcs) M31, DIN 1441, Metric, Flat Washers for Clevis Pins, Coarse Finish, A2 Stainless Steel
By ASPEN FASTENERS
In Stock
$188.53

mpn: ME647-31X31X45X5-000075,

4.6 out of 5 stars with 19 reviews
Diameter (Nominal): M31Diameter (Dimension): 31mmInside Diameter (Nominal): 31mmOutside Diameter (Nominal): 45mmThickness (Nominal): 5mmProduct Class: WashersOrder: Flat WashersCategory: Flat Washers for Clevis PinsSystem of Measurement: MetricBrand: Aspen Fasteners®Form and Design: Coarse FinishMaterial: Stainless SteelMaterial Grade: A2 Stainless SteelCoating: UncoatedStandards and Specifications: DIN 1441Also known as clevis pin spacing washers, used to adjust the grip length of the pin..


Prime-Line 9081355 Fender Washers, 1/4 in. X 1-1/4 in. OD, Zinc Plated Steel, 100-Pack
Prime-Line 9081355 Fender Washers, 1/4 in. X 1-1/4 in. OD, Zinc Plated Steel, 100-Pack
By PRIME-LINE
In Stock
$364.79

mpn: 9081355, ean: 0049793124906,

4.1 out of 5 stars with 26 reviews
Fender washers have a larger outside diameter than standard washers allowing the load to be spread over a larger area. This allows it to be used on softer metals. They are most often used in the automotive and other sheet metal industries.Size: 1/4 inch X 1-1/4 inch OD. Features larger surface area compared to standard washers. Spreads the load over a larger bearing surface. Used for sheet metal work and auto body repair. Because of the larger outside diameter, can be used to cover damage or if


1/4X1 1/4 Fender Washers | Steel | Hot Dip Galvanized (20 POUNDS)
1/4X1 1/4 Fender Washers | Steel | Hot Dip Galvanized (20 POUNDS)
By Jet Fitting & Supply Corp
In Stock
$136.99

mpn: J1420WFG,

4.9 out of 5 stars with 20 reviews
1/4X1 1/4 Fender Washers | Steel | Hot Dip Galvanized (20 POUNDS)Fender Washers. Used when an extra large bearing surface is required. Steel Hot Dip Galvanized.


Brass Flat Washer - 3/8'' Small (.392 ID x .875 OD x .062 Thick) Qty-1,000
Brass Flat Washer - 3/8" Small (.392 ID x .875 OD x .062 Thick) Qty-1,000
By RAW PRODUCTS CORP
In Stock
$247.19

mpn: 756554564825, ean: 0756554564825,

4.7 out of 5 stars with 32 reviews
Brass Flat Washer - 3/8'' Small (.392 ID x .875 OD x .062 Thick) Qty-1,000A flat washer is a round outer diameter thin ring with a center hole (inner diameter) punched to a size just larger than a bolt or screw. Flat washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened. While there are many types of flat washers standard are the most commonly used.. Brass flat washers are made of Dezincification resistant (DZR or DR) brass. Normal


Extra Thick Fender Washers 18-8 Stainless Steel Washers - Pack of 250 Pieces (3/8'' x 1-1/2'' OD)
Extra Thick Fender Washers 18-8 Stainless Steel Washers - Pack of 250 Pieces (3/8" x 1-1/2" OD)
By RAW Products Corp
In Stock
$83.43

mpn: 618930241631, ean: 0793244353970,

4.8 out of 5 stars with 46 reviews
Fender Washers are used to prevent pull-though and provide a greater bearing surface under the fastener. This prevents nuts, bolts or screws from pulling through the base material. Extra Thick Fender Washers are much thicker than a standard Fender Washer (For Example a 1/4'' x 1-1/4'' Standard is 0.050 inches thick, whereas an Extra Thick is Max 0.125 - Min 0.100 inches). They can also be used to fasten holes that are too large or have rust around the edges.Extra Thick Stainless Steel Fender


50 Lb Box 3/8 SAE Flat Washer - Zinc Plated - Approx. 7,000 pcs Bulk
50 Lb Box 3/8 SAE Flat Washer - Zinc Plated - Approx. 7,000 pcs Bulk
By Lexar Industrial
In Stock
$129.99

mpn: 361836892409,

4.3 out of 5 stars with 41 reviews
Lot of approximately (7,000) 3/8'' SAE zinc plated flat washers.Bolt Size: 3/8. Finish: Zinc.


1/4 x 2'' Fender Washers, Large Diameter, Stainless Steel 18-8, Plain Finish, Quantity 500 by Fastenere
1/4 x 2" Fender Washers, Large Diameter, Stainless Steel 18-8, Plain Finish, Quantity 500 by Fastenere
By Fastenere
In Stock
$92.56

mpn: 4088068,

4.0 out of 5 stars with 22 reviews
Fender washers have a larger outside diamter than standard flat washers. These oversized washers are used to spread weight bearing load to a greater surface area. Fender washers are also the perfect choice if the through hole for the fastener is larger than the fastener itselfkeeping it from pulling through the material it is holding.Fender washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is


Fender Washers Zinc - 1/8'' (ID 1/8'' x OD 1'') - Qty-1000
Fender Washers Zinc - 1/8" (ID 1/8" x OD 1") - Qty-1000
By RAW PRODUCTS CORP
In Stock
$72.94

mpn: 722703735392, ean: 0722703735392,

4.9 out of 5 stars with 48 reviews
Fender Washers Zinc - 1/8'' (ID 1/8'' x OD 1'') - Qty-1000Fender washers have a larger outside diameter than regular flat washers.. These washers are used to prevent pull-though and provide a greater bearing surface under the fastener.. This prevents nuts, bolts or screws from pulling through base material..


5/8'' x 3'' x 0.25 Square Plate Washer Low Carbon Steel Hot Dip Galvanized Pk 90
5/8" x 3" x 0.25 Square Plate Washer Low Carbon Steel Hot Dip Galvanized Pk 90
By ASMC Industrial
In Stock
$199.39

mpn: 0000-127370,

4.4 out of 5 stars with 33 reviews
PRODUCT SPECIFICATIONSPart #: 0000-127370Fastener Type: Square Plate WasherSize Description: 5/8'' x 3'' x 0.25Diameter/Nominal Size: 5/8''*System of Measurement: InchGrade: 2Material: Low Carbon SteelFinish: Hot Dip GalvanizedOutside Diameter: 3''Thickness: 0.25Used with: Bolts/Screws up to Grade 5Average Piece Weight: 0.5690000 lbs.*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Actual inside diameter is almost always larger than stated size. Please


Ocal A12P-G Punched Standard Strut Channel, 12 ga THK, 10 ft L
By Ocal
In Stock
$244.28

mpn: OCC A12P-G,

4.0 out of 5 stars with 13 reviews
Ocal Strut Channel, Punched Standard, 1-5/8 in Width, 1-5/8 in Depth, 10 ft Length, 12 ga Thickness, Steel, PVC Coated, GrayChannels cold formed from hot-rolled pickled and oiled strip steelSingle channe.


Type 1 Cross Recess Indented Hex Washer Head Tri-Lobe T.R.S. 10M per Box
Type 1 Cross Recess Indented Hex Washer Head Tri-Lobe T.R.S. 10M per Box
By Off The Shelf Hardware
In Stock
$500.00

mpn: OTSH21-1377403,

4.9 out of 5 stars with 23 reviews
Type 1 Cross Recess Indented Hex Washer Head Tri-Lobe T.R.S. 10M per Box.


Machinery Bushing - 3-1/8'' O.D. - 2-1/8'' I.D. - .126/.142'' Thick - Steel - Plain - Grade 2-25 Pk (CBA50034)
Machinery Bushing - 3-1/8" O.D. - 2-1/8" I.D. - .126/.142" Thick - Steel - Plain - Grade 2-25 Pk (CBA50034)
By Titan Fasteners
In Stock
$184.88
4.8 out of 5 stars with 57 reviews
Machinery Bushing - 3-1/8'' O.D. - 2-1/8'' I.D. - .126/.142'' Thick - Steel - Plain - Grade 2 - 25 PkMachinery bushings are generally applied to shafts to filll a gap, or used to repair assemblies. Commonly used with industrial and farm machinery, or power transmission assemblies.Product Specifications: BRAND: Titan FastenersMANUFACTURERS PART NUMBER: CBA50034SIZE: 3-1/8''INNER DIA.: 2-1/8''OUTER DIA.: 3-1/8''THICKNESS: .126/.142''GRADE: Grade 2MATERIAL: SteelFINISH: PlainUNIT OF MEASUREMENT:


1/2'' Malleable Bevel Washer - 17/32'' I.D. - .313'' Thick - Steel - Galvanized - Grade 2 - Pkg of 25, (Pack of 5) (CLA08)
1/2" Malleable Bevel Washer - 17/32" I.D. - .313" Thick - Steel - Galvanized - Grade 2 - Pkg of 25, (Pack of 5) (CLA08)
By Titan Fasteners
In Stock
$197.50
4.9 out of 5 stars with 10 reviews
1/2'' Malleable Bevel Washer - 17/32'' I.D. - .313'' Thick - Steel - Galvanized - Grade 2 - Pkg of 25Square Beveled Washers are commonly used to provide a parallel bearing surface when fastening bolts through the flanges of I-beams in structural applications.Product Specifications: BRAND: Titan FastenersMANUFACTURERS PART NUMBER: CLA08SIZE: 1/2''INNER DIA.: 17/32''OUTER DIA.: 1-3/4''THICKNESS: .313''GRADE: Grade 2MATERIAL: SteelFINISH: Hot Dip GalvanizedUNIT OF MEASUREMENT: Inch


1/4X5/8 Flat Washer 18 8 Stainless Steel, Pkg of 5000
1/4X5/8 Flat Washer 18 8 Stainless Steel, Pkg of 5000
By Kanebridge
In Stock
$359.49
4.5 out of 5 stars with 21 reviews
1/4X5/8 Flat Washer 18 8 Stainless Steel. Flat head screws are used when protrusion of the fastener above the mating surface is unacceptable. Typically 100 degree flat or for fastening softer materials, 82 degrees flat.Product Specifications: BRAND: KanebridgeSIZE: 1/4''GRADE: 18-8 Stainless SteelMATERIAL: Stainless SteelFINISH: 18-8 Stainless SteelUNIT OF MEASUREMENT: Inch (Imperial)PACKAGE QTY: 5000LENGTH: 5/8''DESCRIPTION: Flat WasherSIZE: 1/4''. GRADE: 18-8 Stainless Steel. MATERIAL:


3/8X7/8 Flat Washer 18 8 Stainless Steel, Pkg of 3000
3/8X7/8 Flat Washer 18 8 Stainless Steel, Pkg of 3000
By Kanebridge
In Stock
$373.29
4.0 out of 5 stars with 53 reviews
3/8X7/8 Flat Washer 18 8 Stainless Steel. Flat head screws are used when protrusion of the fastener above the mating surface is unacceptable. Typically 100 degree flat or for fastening softer materials, 82 degrees flat.Product Specifications: BRAND: KanebridgeSIZE: 3/8''GRADE: 18-8 Stainless SteelMATERIAL: Stainless SteelFINISH: 18-8 Stainless SteelUNIT OF MEASUREMENT: Inch (Imperial)PACKAGE QTY: 3000LENGTH: 7/8''DESCRIPTION: Flat WasherSIZE: 3/8''. GRADE: 18-8 Stainless Steel. MATERIAL:


1/2''x1-3/8'' O.D, USS Type A Wide Flat Washer, Steel, Through Hardened, Zinc Yellow, PK25 - pack of 5
1/2"x1-3/8" O.D, USS Type A Wide Flat Washer, Steel, Through Hardened, Zinc Yellow, PK25 - pack of 5
By Unknown
In Stock
$104.00

mpn: NA, ean: 7442547535516,

4.0 out of 5 stars with 53 reviews
These Through-Hardened Steel Flat, Round Washers can be used with Grade 8 fasteners and feature 2 smooth, hard, flat surfaces for distributing the force/stress of a nut or bolt. They also help to reduce friction and heat during the installation of a threaded fastener.Features Fastener Finish - Zinc Yellow Fits Bolt Sizes - 1/2'' Washer Inside Dia. - 9/16'' Washer Outside Dia. - 1-3/8'' Thickness - 0.109'' Thickness Tolerance - .023/-.023 Rockwell Hardness - C38 to C45 Application -


2'' Machinery Bushing - 2'' I.D. - .126/.142'' Thick - Steel - Plain - Grade 2-10 Gauge - Pkg of 25 (CFA32016)
2" Machinery Bushing - 2" I.D. - .126/.142" Thick - Steel - Plain - Grade 2-10 Gauge - Pkg of 25 (CFA32016)
By Titan Fasteners
In Stock
$98.97
4.9 out of 5 stars with 59 reviews
2'' Machinery Bushing - 2'' I.D. - .126/.142'' Thick - Steel - Plain - Grade 2 - 10 Gauge - Pkg of 25Machinery bushings are generally applied to shafts to filll a gap, or used to repair assemblies. Commonly used with industrial and farm machinery, or power transmission assemblies.Product Specifications: BRAND: Titan FastenersMANUFACTURERS PART NUMBER: CFA32016SIZE: 2''INNER DIA.: 1''OUTER DIA.: 2''THICKNESS: .126/.142''GRADE: Grade 2MATERIAL: SteelFINISH: PlainUNIT OF MEASUREMENT: Inch



Viewing Page 4 of 7

View more products in Washers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - theheraldnetwork.com. All Rights Reserved.